5 -35
5-8. Every 100 hour check
(1) Checking and adding Engine
oil
Oil specification and capacity:
See chapter 5-3, “Lubricants and Capacity” or
the last page in this manual.
Engine oil gauge
Engine oil gauge
Oil filling inlet
Checking engine oil level
- Check and add the engine oil every 100 hours
of operation.
- Check it before starting engine or at 5 minutes
later after stopping engine.
- It must only be checked while the engine is
stopped.
- Check if the oil level is between MAX and MIN
marks of the engine oil gauge. If the engine oil
level is under the minimum mark, add new
engine oil up to the maximum mark as much
as possible.
- If your engine is operated in dusty/dirty
conditions, the service interval must be shorter
than normal condition.
▶ The amount of engine oil consumed may vary depending on the operating
conditions. Check the amount of engine oil regularly and if necessary add new
engine oil. Otherwise, the engine can be stuck or broken by engine oil shortage.
Caution
To Next Page
Loading...
Need help?
General
