LuxaFlex PowerView M50 Series User Manual

CONTENTS
GETTING STARTED
Getting Started ................................................................................................................ 1
Remote Control Overview ................................................................................................. 2
Using Multiple remotes within a home (Copying Network ID) .............................................. 4
Programming Overview.................................................................................................... 5
PROGRAMMING
STEP 1 — Join a Shade to a Group ................................................................................ 5
STEP 2 — Reverse the Motor Direction (If Necessary) ...................................................... 6
STEP 3 — Set the Motor Upper Limit ............................................................................... 6
STEP 4 — Set the Motor Lower Limit ............................................................................... 7
STEP 5 — Set a Favourite Position (Optional) ................................................................... 8
STEP 6 — Creating a Duplicate Remote ........................................................................... 8
STEP 7 — Test the Motors and PowerView Shade Network ............................................... 9
APPENDIX A
Clear Motor Limits ......................................................................................................... 10
Remove a Shade from a Group ....................................................................................... 10
Deactivate the remote’s auto-wake feature ..................................................................... 11
Reset Shade Network Programming ............................................................................... 11
Reset to Factory Default ................................................................................................. 11
Control the motor with Dry Contacts (M40 Motor only) ..................................................... 12
Hunter Douglas Australia
338 Victoria Rd Rydalmere, NSW, 2116, Australia
PowerView has been certified as complying with ACMA'S regulatory requirements.
© Copyright 2016 Hunter Douglas Limited [ABN 98 009 675 709]
® Luxaflex, PowerView and Pebble are registered Trade Marks of Hunter Douglas •10/2016

LuxaFlex PowerView M50 Series Specifications

General

Brand	LuxaFlex
Model	PowerView M50 Series
Category	Controller
Language	English