MAAX Utile User Manual

7
2
STEP Installing the base
B3 / Olympia / Zone Square / Distinct
Apply silicone around the edge of the drain hole in
the base (surface between the top part of the drain
and the base). Assemble as shown.
HAND TIGHTEN ONLY !
VERIFY THE MAAX LOGO ON THE DRAIN COVER
IS FACING THE RIGHT WAY
REMOVE SILICONE EXCESS!
Install the base (13) pushing it completely against the
studs.
Top view
2.1
Check me!
2.2
Check me!
Cardboard
Rubber
13
Top view
Flush
Studs
Flush
Remove the clear plastic lm from around the drain hole
and threshold before applying silicone. Keep the lm on
the base oor as protection untilinstallation is complete.
Drain assembly (included with Zone square and B3Square, required for the Distinct base)
Threshold
Drain position varies according to base model

MAAX Utile Specifications

General

Brand	MAAX
Model	Utile
Category	Other
Language	English