17
17
Swim Spa
SWIM SPA SERIES CONTROL SYSTEM
The 460 Control System o ers you the
ultimate in Swim Spa control. The backlit,
Liquid Crystal Display (LCD) displays
current water temperature, set point water
temperature, time, and operating mode
settings. Each feature of the system is actuated
through a control panel touch pad. Touch
the appropriate pad to activate the desired
function. At start up, when power is supplied
to the Swim Spa, the controls will operate
properly and safely under the factory settings.
The Swim Spa will be in Standard Mode, a
temperature setting of 100°F (38°C), and a
ltration cycle duration of 2 hours. To fully
utilize the unique capabilities of the control
system, it is important to know how to set the
temperature, operate the pumps, operate the
light, adjust the mode setting, and change the
ltration cycles.
NOTE: In event of a power outage or
failure, the Control System should retain all
settings, except time of day. If settings are
lost, re-program per the instructions in this
manual and contact your dealer.
Swim Spa swim zone control
All Swim Spa models utilize the topside control panel shown above. This control panel operates
all functions of the swim zone on all models. This control supports the following features:
• 2 Dual-speed Jet Pumps
• Underwater LED lighting
• Ambient Interior LED
Mood Lighting
• Temperature Setting
• Customized Filtration
Settings
To Next Page
Loading...
Need help?
General
