MAAX xstream User Manual

34
34
Swim Spa
COMMON WATER PROBLEMS
Problem
Cloudy Water
Water Odour
Chlorine Odour
Bromine Odour/
Yellow Water
Usual Cause
- Inadequate  ltration/
dirty  lter
- Excessive oils/organic
matter
- Improper sanitation/
bacteria
- High pH and/or
high alkalinity
- Suspended particles/
organic matter
- High total dissolved
solids
- Excessive organics or
chloramines; insu cient
free available sanitizer
- Improper sanitation
- Inadequate  ltration
- Low pH
- Too many chloramines/
insu cient free
available chlorine
- Low pH
- Low pH
Solution
- Check to make sure the  lter is running
properly; clean  lter with a  lter cleaner
or degreaser
- Shock the Swim Spa with a chlorine or
bromine sanitizer, or other shock treatment
product
- Increase sanitizer level to balance water
and shock if needed
- Adjust pH; add appropriate sodium bisulfate
product
- Use clari er
NOTE: Your Swim Spa utilizes an
ozone generator. Please consult your
dealer before using polymer based clari ers
- Depending on the severity, drain the
Swim Spa to half and re ll, or drain
completely, clean and re ll
- Shock with a chlorine or bromine sanitizer,
or other shock treatment product
- Increase sanitizer to balance water;
shock if necessary
- Make sure that  lter is operating properly;
clean with  lter cleaner
- Raise pH with sodium bisulfate product.
If metals are present, add chelating agent.
- Shock with a chlorine or bromine sanitizer,
or other shock treatment product
- Raise pH with sodium bisulfate product.
If metals are present, add chelating agent
- Adjust pH; raise pH with sodium bicarbonate
poduct

MAAX xstream Specifications

General

Brand	MAAX
Model	xstream
Category	Hot Tub
Language	English