USB OPERATION
The unit will read the audio/video les on USB devices automatically.
NOTE: The USB ports will recognize most USB ash memory devices and portable hard
drives. Hard drives must be formatted to FAT32 and NTFS is not supported.
Inserting/Removing a USB Device or microSD Card
Note: The microSD card is used to update navigation software only.
To insert a USB device or microSD card:
1. Locate the Interface Cover on the front of the radio.
USB Slot and microSD Card Slot Location
2. Lift the protective cover to reveal the USB slot and microSD card slots.
3. Insert the USB device/microSD card into the USB/microSD card connectors.
Note: microSD cards are inserted into the microSD card slot until a click is heard. The
click will ensure that the card is securely inserted to the unit.
To remove the USB device or microSD card:
1. Touch the SRC icon on the main menu or press the SRC button on the front panel to switch to
another mode.
2. Remove the USB device or microSD card from the connector.
106
To Next Page
Loading...
Need help?
General
