39
When changing from forward to reverse or back to forward again while in
high range make sure the tractor comes to a stop before changing direction.
Failure to do so is likely to result in damage to the mechanism and place the
driver at risk of injury.
important
Operate the shuttle shift only while seated on the tractor.
Do not use the shuttle shift lever to start the tractor for towing or traveling
uphill, use the clutch instead.
Always stop the tractor before getting off.
Caution
▶Main gear lever
This lever can be shifted by using the clutch, both
when the tractor is stationary or mobile.
It is located on the R.H.S of the driver seat.
▶ Sub gear lever(Linear shift lever)
Operate the sub gear lever using clutch to select the
appropriate speed for different applications.
It is located on the LHS of driver seat.
Do not operate gear levers without stopping the tractor & without using the
clutch.
important
▶ Diff-lock pedal
In case of wheel slippage use the diff-lock by pushing
down on the diff lock pedal.
To release it remove the foot from the pedal.
Tractor will be difficult to turn if the
Diff-lock is engaged, ensure the lock is
disengaged before turning the steering
wheel.
Danger
To Next Page
Loading...
Need help?
General