EasyManuals Logo
Home>Mahindra>Tractor>10 Cab Series 4510C

Mahindra 10 Cab Series 4510C User Manual

Mahindra 10 Cab Series 4510C
115 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #60 background imageLoading...
Page #60 background image
54
CHECKS AND SERVICE
PRE-START CHECKS
To avoid problems it is recommended that a range of checks be carried out daily before starting
the tractor.
For full details of the items and frequency please refer to the tables on page 57,58, and 59.
Engine coolant
Remove the radiator cap and ensure that the coolant is up to
the filler neck and that it is clean with the correct anti-freeze
or anti corrosion inhibitor in it.
If the coolant is a rusty color, drain the system completely and
refill with the correct mixture of water and anti-freeze or
corrosion inhibitor.
Engine oil
Pull out the stick, wipe it and dip in the oil sump.
Ensure that oil level is between the upper and lower mark
near the upper mark. If too low add oil, but never excess
100hrs.
important
Do not overfill the crankcase with oil.
Transmission oil
Check the level with the dipstick on top of the transmission in rear of the seat.
If the level is low add oil through the filler hole.
Always ensure that you use the correct oil for topping up or oil changes
Caution

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mahindra 10 Cab Series 4510C and is the answer not in the manual?

Mahindra 10 Cab Series 4510C Specifications

General IconGeneral
BrandMahindra
Model10 Cab Series 4510C
CategoryTractor
LanguageEnglish

Related product manuals