Makita AF506 User Manual

11 ENGLISH
Maintenance of nailer
Alwayscheckthetoolforitsoverallconditionandloose
screwsbeforeoperation.Tightenasrequired.
Withtooldisconnected,makedailyinspectiontoassure
freemovementofthecontactelementandtrigger.Do
notusetoolifthecontactelementortriggersticksor
binds.
Whenthetoolisnottobeusedforanextendedperiod
oftime,lubricatethetoolusingpneumatictooloiland
storethetoolinasafeplace.Avoidexposuretodirect
sunlight and/or humid or hot environment.
►Fig.17
Maintenance of compressor, air set
and air hose
Afteroperation,alwaysdrainthecompressortankand
theairlter.Ifmoistureisallowedtoenterthetool,
itmayresultinpoorperformanceandpossibletool
failure.
►Fig.18: 1. Drain cock
►Fig.19: 1.Airlter
Checkregularlytoseeifthereissufcientpneumatic
tooloilintheoileroftheairset.Failuretomaintainsuf-
cient lubrication will cause O-rings to wear quickly.
►Fig.20: 1. Oiler 2. Pneumatic tool oil
Keeptheairhoseawayfromheat(over60°C,over
140°F),awayfromchemicals(thinner,strongacidsor
alkalis).Also,routethehoseawayfromobstacleswhich
it may become dangerously caught on during operation.
Hosesmustalsobedirectedawayfromsharpedges
and areas which may lead to damage or abrasion to
the hose.
TomaintainproductSAFETYandRELIABILITY,
repairs,anyothermaintenanceoradjustmentshould
beperformedbyMakitaAuthorizedorFactoryService
Centers,alwaysusingMakitareplacementparts.
OPTIONAL
ACCESSORIES
CAUTION: These accessories or attachments
are recommended for use with your Makita tool
specied in this manual.Theuseofanyother
accessoriesorattachmentsmightpresentariskof
injurytopersons.Onlyuseaccessoryorattachment
foritsstatedpurpose.
Ifyouneedanyassistanceformoredetailsregard-
ingtheseaccessories,askyourlocalMakitaService
Center.
• Nails
• Airhose
• Safetygoggles
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differfromcountrytocountry.

Makita AF506 Specifications

General

Soft grip	Yes
Product type	Nailer
Product color	Black, Blue, Silver
Magazine capacity	100
Nail length (max)	50 mm
Nail length (min)	15 mm
Hose inner diameter	1/4 \
Maximum operating pressure	8.27 bar
Minimum operating pressure	4.82 bar
Power source	Pneumatic

Weight and Dimensions

Depth	70 mm
Width	250 mm
Height	256 mm
Weight	1300 g