3
Packing/Disposal
The MAKITA electric chain saw will be delivered in a protective
cardboard box to prevent transport damages.
Cardboard is a basic raw material and is therefore consequently
reuseable or suitable for recycling (waste paper recycling).
Be a good steward of the environment! Do not dispose of
electrical appliances with the household trash!
If the saw is no longer operable or repairable, ask the appro-
priate waste disposal authority about the proper means of dis-
posal.
In order to preclude any hazard to other persons from a de-
fective electrical appliance, cut off the power cord next to the
housing.
CAREFUL! Before cutting off the power cord, pull the
plug. Otherwise you can be exposed to a life-threatening
shock!
Intended use
Electric saws
This electric saw may be used only for sawing wood. It is in-
tended for occasional use in thin wood, caring for fruit trees,
felling, removing limbs, and trimming to length.
Persons who may not sue the saw:
This saw must not be used by persons who are not familiar
with this instruction manual, children, young people, or anyone
undertheinuenceofalcohol,drugsormedication.
Delivery inventory
1. Electric chain saw
2. Guide bar
3. Saw chain
4.
Cord grip for electric cord
5. Chain protection cover
6. Instruction manual
(not shown)
In the case that one of the parts listed should not be included in
the delivery inventory, please, consult your sales agent.
EU Conformity Declaration
The undersigned, Yasuhiko Kanzaki, declare that the MAKITA
machines,
Type: 226 EU prototype test certicate No.
UC3030A M6 06 07 24243 068
UC3530A / AP M6 06 07 24243 068
UC4030A / AP M6 06 07 24243 068
UC4530A M6 06 07 24243 068
manufactured by DOLMAR GmbH, Jenfelder Str. 38, 22045
Hamburg, Germany, conforms to the basic safety and health
requirements of the applicable EU guidelines:
EU Machinery Directive 98/37/ EG, EU EMC Directive 89/336/
EWG(modiedby91/263/EWG,92/31/EWGand93/68/EWG),
EU low voltage Directive 73/23 EWG (modiedby 93/68/EWG,
Outdoor Noise Directive 2000/14/EG.
The most important standards applied to properly meet the
requirements of the above EU Directive were: EN 60745-2-13,
EN 61000-3-2, EN 61000-3-3, EN 55014-1, EN 55014-2.
The conformity assessment procedure 2000/14/EG was per
-
formed per Annex V. The measured sound power level (Lwa)
is 101,5 dB(A). The guaranteed sound power level (Ld) is 103
dB(A).
The EC-Type-Examination Certificate per 98/37/EG was
performedby:TÜVSüdProduct ServiceGmbH,Zertizier-
ungsstelle, Ridlerstr. 31, D-80339 München.
Yasuhiko Kanzaki CE 2006
Managing Director
MAKITA INTERNATIONAL EUROPE LTD.
Michigan Drive, Tongwell, Milton Keynes, Bucks MK15
8JD, ENGLAND
Responsable person manufacturer:
Makita Corporation Anjo Aichi Japan
To Next Page
Loading...
Need help?
General
