Manitowoc Published 05-15-17, Control # 043-09 1-1
999 LUFFING JIB OPERATOR MANUAL INTRODUCTION
SECTION 1
INTRODUCTION
CRANE DATA
See end of this section for data specific to your luffing jib:
• Basic Specifications
CRANE/ATTACHMENT IDENTIFICATION
An identification label is attached to the outside of the
operator’s cab (see Figure 1-1
) and to the attachments
(luffing jibs) available for this crane.
The crane or attachment model, application, and serial
number are provided on the label.
For the exact location of the identification labels on the crane
and attachments, see the Nameplates and Decals Drawing
at the end of Section 2.
See the end of this section for Luffing Jib weights.
CHANGE OF OWNERSHIP REGISTRATION
If you are the new owner of a Manitowoc crane, please
register it with the Manitowoc Crane Care Lattice Team so
we can contact you if the need arises.
1. Go to www.manitowoccranes.com
2. Go to Service > Manitowoc Crane Care > Service
Information > Change of Ownership Form.
3. Complete the form.
MANITOWOC DEALER
For questions about this manual or the 999 crane, contact
your Manitowoc dealer. If you do not know the contact
information for your dealer, locate the Manitowoc dealer
nearest you, as follows:
1. Go to www.manitowoccranes.com
2. Go to Dealer Locater.
3. Follow the on-screen prompts to locate your Manitowoc
dealer.
CRANE ORIENTATION
The terms RIGHT, LEFT, FRONT, REAR used in this manual
refer to operator’s right, left, front, and rear sides when
seated in the operator’s cab looking forward.
• The boom is on the front of the upperworks.
• The carbody and crawler controls are on the front of the
carbody.
FIGURE 1-1
Serial
Number
Model
Number
To Next Page
Loading...
Need help?
General
