National Crane PUBLISHED 04-26-2019 CONTROL # 113-09 1-1
600E2 OPERATOR MANUAL INTRODUCTION
SECTION 1
INTRODUCTION
This manual has been compiled to assist you in properly
operating and maintaining your Model 600E2 Series
National Crane.
Before placing the crane in service, all operators and
persons working around the crane must thoroughly read and
understand the contents of the manual pertaining to Safety,
Operation and Maintenance. Before moving a vehicle
equipped with the crane, information relating to transporting
the vehicle must be read and observed.
This manual must be retained with the machine for use by
subsequent operating personnel.
Information in this manual does not replace federal, state or
local regulations, safety codes or insurance requirements.
The National Crane has been designed for maximum
performance with minimum maintenance. With proper care,
years of trouble-free service can be expected.
Constant improvement and engineering progress makes it
necessary that we reserve the right to make specification
and equipment changes without notice.
National Crane and our Distributor Network want to ensure
your satisfaction with our products and customer support.
Your local distributor is the best equipped and most
knowledgeable to assist you for parts, service and warranty
issues. They have the facilities, parts, factory trained
personnel, and the information to assist you in a timely
manner. We request that you first contact them for
assistance. If you feel you need factory assistance, please
ask the distributor’s service management to coordinate the
contact on your behalf.
Supplemental Information
Supplemental Information regarding Safety & Operation,
Specifications, Service & Maintenance, Installation, and
parts for options such as remote controls, augers, varying
control configurations, baskets, grapples, etc. is included in
separate sections of this manual, if applicable.
Engine operating procedures and routine maintenance
procedures are supplied in a separate manual with each
crane, and should be referred to for detailed information.
Whenever a question arises regarding your National Crane
product or this publication, please consult your National
Crane distributor for the latest information. Your National
Crane distributor is equipped with the proper tools,
necessary parts, and trained personnel to properly maintain
and service your equipment.
A Safety Compact Disc or a USB flashdrive which includes
sections on Operation, Service and a Safety Video for
National Crane operators and owners is supplied when the
equipment is purchased new. Additional copies are available
from your local distributor.
New Owner
If you are the new owner of a National crane, please register
it with Manitowoc Crane Care so we have the ability to
contact you if the need arises.
Go to https://www.manitowoccranes.com/en/
Parts_Services/ServiceAndSupport/
ChangeOfOwnershipForm and complete the form.
Fo
r
Reference
Only
To Next Page
Loading...
Need help?
General
