RATED CAPACITY LIMITER NBT50 OPERATOR MANUAL
7-10 Published 03-23-2018 Control # 243-14
• Boom Length (BL) = 102.0 ft
• Boom Angle (BA) = 49.9°
• Load Radius (LR) = 93.4 ft
• Boom Tip Height (TH) = 76.1 ft
• # Parts of Line (#) = 1
• Maximum Allowable Load (ML) = 3,500 lb
• Actual Load (AL) = 1,150 lb
• % of Maximum Capacity = 33%
• All Active Limits
Function Keys:
- Main - pressing returns to the MAIN Menu screen.
- Horn Silence - pressing disables the horn for 15
seconds per press.
- # - Reeving selection screen, pressing returns to the
number of parts of line selection screen.
- Limit - pressing enables the RCL limits options
menu.
- Tare - pressing temporarily zeros out the Actual
Load Indicated on the screen to show the weight of
the load only.
TARE Function
The TARE function calculates the net weight of the load
(Total Load –Hook Block). The TARE function must be
activated before lifting. To use the TARE function:
• Rig the load to the hook block.
• Before lifting the load, press the TARE function.
• Lift the Load. The net load is shown in the actual number
display.
The TARE button icon will flash blue in color when active.
Changing the boom angle or length automatically returns the
actual load display back to the total weight (Load +Hook
Block).
To Next Page
Loading...
Need help?
General
