Safety Notes
410/420/430 - 001 8903 U1
UZEL
7
Safety Alert Symbol and Terms
This safety alert symbol means ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
The safety alert symbol identifies important safety messages on machines, safety signs, in manuals, or
elsewhere.
When you see this symbol, be alert to the possibility of personal injury or death.
Follow the instructions in the safety message.
Why is SAFETY important to you?
* ACCIDENTS DISABLE and KILL *
* ACCIDENTS are COSTLY *
* ACCIDENTS can be AVOIDED *
------------------------------------------------------------------------------------------------------------------------------------------------
Tractor and Implement Safety
The tractor is a source of power - Mechanical and Hydraulic.
On its own, the tractor is of little practical value. Only when used in conjunction with an implement or other
attachment
does it become a working unit.
This instruction book is compiled to cover those safe working practices that are associated with the base tractor
operation.
It does not cover all operation and safety instructions relevant
to all known implements and attachments that may be fitted at the time of tractor delivery or at some future
date.
It is essential that operators use and understand the relevant instruction manual of such implements and
attachments.
------------------------------------------------------------------------------------------------------------------------------------------------
Introduction to safety
This safety section of your Operator Instruction Book
is intended to point out some of the basic safety
situations which may be encountered during the
normal operation and maintenance of your
FOOTSTEP (ROPS) tractor, and to suggest possible
ways of dealing with these situations. This section is
NOT a replacement for other safety practices featured
in other sections of this book.
Additional precautions may be necessary, depending
on attachments used and conditions at the work site
or in the service area. Massey Ferguson has no direct
control over tractor application, operation, inspection,
lubrication, or maintenance. Therefore it is YOUR
responsibility to use good safety practices in these
areas.
A word to the operator
It is YOUR responsibility to read and understand the
safety section in this book before operating your
tractor.
You must follow these safety instructions that take
you step by step through your working day. In reading
this section, you will note that illustrations
have been used to highlight certain situations. Each
illustration is numbered and the same number appears
in the text in parenthesis. This number is placed at
the end of the written text that refers to the illustration.
Remember that YOU are the key to safety. Good
safety practices not only protect you, but also the
people around you. Study the features in this manual
and make them a working part of your safety
programme. Keep in mind that this safety section is
written only for this type of machine. Practice all other
usual and customary safe working precautions, and
above all - REMEMBER - SAFETY IS YOUR
RESPONSIBILITY. YOU CAN PREVENT SERIOUS
INJURY OR DEATH. Use only AGCO - Massey
Ferguson approved attachments and equipment.
To Next Page
Loading...
Need help?
General
