XSeries
Video Screen
Operations
4.5” Screen
The XSeries 4.5” video touch screen is
a multi-functional tool that provides GPS
tracking, multi-media display, cruise con-
trol, rider proles, and enables equipment
operators to view a wide range of engine,
ballast, transmission parameters and ser-
vice codes.
Care and Maintenance
Only basic cleaning should be required
to maintain the 4.5” video touch screen at
its best. A soft cloth can be used for clean-
ing the units. Typical window cleaner or
rubbing alcohol can also be used to clean
the glass portion of the video screen dis-
play. Do not use harsh or abrasive cleaners
on the unit.
Avoid contact between sharp or hard objects
and the video touch screen because this can
result in scratches or other permanent marks
on the screen. Clean only with a sof cloth,
using window cleaner or rubbing alcohol only.
Never use harsh or abrasive cleaners on the
unit, as this may result in damage to the unit
that is not covered under warranty.
Basic Navigation Features
All features are easily accessible through
the quick access keys, touch point com-
mands and menus.
Quick Access Keys
The following controls are accessible
through the quick access keys:
• Audio
• Ballast/trim
• Gauges
• Video
• Settings menu
• GPS
• User proles
• Cruise ON/OFF
• Increase value
• Decrease value
All of these keys, as shown, are called
quick access keys because a new screen
can be called up immediately, without go-
ing through other screens, by pressing on
that key.
Page 3-8 2014 MasterCraft Owners Manual • Gauges & Video Screens
G A U G E S & V I D E O S C R E E N S
To Next Page
Loading...
Need help?
General
