MasterCraft 2014 X46 User Manual

Page 3-32 2014 MasterCraft Owners Manual • Gauges & Video Screens
G A U G E S & V I D E O S C R E E N S
Additional Settings
System Settings
The System Settings screen displays the
current software version loaded on the unit.
It is typically only accessed when the unit
is rst installed for the purpose of congur-
ing the unit. You can set individual settings
for the available options, or choose to se-
lect [RESTORE DEFAULTS] for the fac-
tory settings.
Default Settings
This screen provides various elds for
adjusting the values for Ballast and Smart-
plate. The Smartplate Crossover point also
denes the threshold for setting the auto-
matic audio volume control.
Fault Code Pop-ups
A fault condition will trigger a pop-up
dialog box on the screen describing the na-
ture of the fault.
How to Hide/Show Faults
To hide the fault code pop-up being
displayed on the screen, press the soft key
next to the [HIDE] icon. The pop-up will
disappear; however, the [WARNING] or
[STOP] icon will remain on the screen
to indicate there is still a fault. Pressing
[HIDE] does not clear the fault; it only
hides the pop-up message.
When a fault code has been hidden, a
[SHOW] icon will remain in the bottom
right corner. When this soft key is pressed,
the fault code will again be displayed.
Scrolling Through Multiple
Messages
The title bar of the fault code pop-up
may indicate multiple messages, as in “Di-
agnostic Message 1 of 3.” Press to scroll
through the different messages.
Troubleshooting
Issue:
Display appears to not work or
doesn’t come ON.
Possible Remedies:
• Display could be in SLEEP mode. Touch
a key on the keypad to activate the dis-
play.
• Check for loose connections at battery
and display unit.
• Check for reversed polarity on the pow-
er connections, if connected to shore
power.
• Verify battery has a minimum voltage of
6.0 volts.
Issue:
Display resets or goes OFF when
starting engine.
Possible Remedies:
• Check display supply wires are connect-
ed properly to battery.
• Verify the battery is charged properly.
• Check battery for efcient starter cur-
rent.
Issue:
Display has no backlight.
Possible Remedy:
• Contact an authorized MasterCraft
dealer.
Issue:
Display has no keypad backlight.
Possible Remedy:
• Contact an authorized MasterCraft
dealer.

MasterCraft 2014 X46 Specifications

General

Brand	MasterCraft
Model	2014 X46
Category	Boat
Language	English