Matrix E7XI-01 User Manual

102
CHAPTER 9: PART REPLACEMENT GUIDE
9.10 CONSOLE REPLACEMENT
1) Turn off the power and disconnect the cord from the machine.
2) Remove the 5 screws that hold the console to the top of the console mast (Figure A).
3) Disconnect the console cable and other wiring and remove the console (Figure B).
4) Remove the 5 screws that hold the mounting plate to the console (Figure C).
5) Attach the mounting plate to the new console.
6) Connect the wire connections to the new console.
7) Carefully push the wires into the console and mast until they are clear of the console / mast connection and attach the console to the mast
using the 5 screws removed in Step 2.
8) Test the Suspension Elliptical for function as outlined in Section 9.23.
FIGURE A FIGURE B
FIGURE C

Matrix E7XI-01 Specifications

General

Brand	Matrix
Model	E7XI-01
Category	Elliptical Trainer
Language	English