12
1.4 Electrical Requirements
For your safety and to ensure good treadmills performance, the ground on this circuit must be
no-looped. Before connecting the plug into an electrical outlet, make sure that the voltage
requirements match that the voltage of the treadmill.
ATTENTION: Your treadmill is provided with a power cord. Please only use with the power
cord as supplied, or with Matrix spare part, otherwise this may result in damage.
1.5 grounding instructions
The treadmill must be grounded. If it should malfunction or breakdown, grounding provides a
path of least resistance for electric current to reduce the risk of electric shock. The treadmill is
equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug
must be plugged into an appropriate outlet that is properly installed and grounded in accordance
with all local codes and ordinances. If the user does not follow these grounding Instructions, the
user could void the Matrix limited warranty.
DANGER : Improper connection of the equipment-grounding conductor can result in the risk
of electric shock. Check with a qualified electrician or serviceman if the user is in doubt as to
whether the product is properly grounded. Do not modify the plug provided with the product if it
will not fit the outlet; have a proper outlet installed by a qualified technician.
120v units
The Matrix T50X, T50X-U 120 treadmill is for use on a nominal 120-volt circuit and has a non-
looped grounding plug. Make sure that the 120-volt treadmill is connected to an outlet, NEMA
5-20R, having the same configuration as the plug. No adapter should be used with this product.
220v units
The Matrix T50X, T50X-U 220 treadmill is for use on a nominal 220-volt circuit and has a non-
looped grounding plug. Make sure that the 220-volt treadmill is connected to an outlet, NEMA
6-20R, having the same configuration as the plug. No adapter should be used with this product.
To Next Page
Loading...
Need help?
General
