25
FUNCTION & DEFAULTS DESCRIPTIONS MODIFIED
Keypad This option is for a keypad test. N/A
Touch Calibration This option allows for a touch calibration of the
console. Follow the cross mark and touch the
screen to catch. After 5 positions are tested, touch
the center of the screen to exit this test.
N/A
Keypad Type
Default: LAM
This option sets the type of keypad for the
treadmill. It should always be set for T7xe-04 for
this treadmill.
Quick Start or No Quick Start or
LAM
Radio Test This option will test the radio signal for function. N/A
SERVICE MODE
Test
7.3 SERVICE MODE - TAB 2
CHAPTER 7: SERVICE MODE
T7xe-04-C Keypad - New keypad -
T7xe-02--C Keypad - Old keypad -
Includes Quick Start Key
T7xe-03--C Keypad - Old keypad - Does
NOT Includes Quick Start Key
To Next Page
Loading...
Need help?
General
