37
7.4 ASSEMBLY INSTRUCTIONS
GETTING STARTED
Read the owner's manual before setting up the Matrix W1x Rower. Place the unit where it will be used before beginning the setup procedure.
MAKING A CHOICE OF SITE
The site should be well lit and well ventilated. Locate the Matrix W1x Rower on a structurally solid and flat surface. If the site has a heavy plush carpet, to
protect the carpeting and machinery, you should place a rigid plastic base under the unit.
Please do not place the Matrix W1x Rower in an area of high humidity, such as the vicinity of a steam room, indoor pool, or sauna. Exposure to intensive
water vapor or chlorine could adversely affect the electronics, as well as other parts of the machine.
CHAPTER 7: ROWER SPECIFICATIONS AND ASSEMBLY GUIDE
To Next Page
Need help?
General
