214
8.2. Mounting the water tank on the robot vacuum
cleaner
NOTICE!
Risk of damage to property!
Moisture from the mop attachment and residual wa-
ter in the water tank may damage the appliance or the
charging station.
Remove the water tank immediately before return-
ing the wiper robot to the charging station.
Hook one of the water tank locking tabs into the
intended locking slot.
Then, carefully press the water tank downwards
until the second locking tab audibly clicks into the
locking slot.
To release the water tank, lift the water tank by the
front and pull the water tank out of the robot vac-
uum cleaner, being careful not to apply too much
force.
19601 ML DirectSales ML Content 5006 4564 RC1.indb 21419601 ML DirectSales ML Content 5006 4564 RC1.indb 214 24.09.2020 14:08:1924.09.2020 14:08:19
To Next Page
Loading...
Need help?
General
