132
Controls in detail
Instrument cluster
For a full view illustration of the instrument
cluster, see “Instrument cluster”
(
컄 page 24).
The instrument cluster is activated when
you
앫 open a door
앫 switch on the ignition
앫 press the reset button (컄 page 24)
앫 switch on the exterior lamps
Opening a door will activate the instrument
cluster only for about 30 seconds.
You can change the instrument cluster set-
tings in the Instrument cluster submenu of
the control system (
컄 page 149).
Instrument cluster illumination
Use the reset button to adjust the illumina-
tion brightness for the instrument cluster
and the switches on the center console.
1 Reset button
To brighten illumination
왘 Turn reset button 1 in the instrument
cluster clockwise.
The instrument cluster illumination will
brighten.
To dim illumination
왘 Turn reset button 1 in the instrument
cluster counterclockwise.
The instrument cluster illumination will
dim.
i
The instrument cluster illumination is
dimmed or brightened to suit ambient
light conditions.
To Next Page
Loading...
Need help?
General
