396
Practical hints
Replacing bulbs
Replacing bulbs for rear lamps
Before you start to replace a bulb for a rear
lamp, do the following first:
왘 Turn the exterior lamp switch to posi-
tion M (
컄 page 123).
왘 Open the trunk (컄 page 108).
Tail lamp unit
1 Backup lamp
2 Turn signal lamp
3 Driver’s side: Rear fog lamp
Passenger’s side: Substitute lamp
왘 Fold the trim to the side and remove it.
왘 Turn the bulb socket counterclockwise
and pull it out.
왘 Gently push the bulb into the socket,
turn it counterclockwise and remove it.
왘 Insert the new bulb and reinstall the
bulb socket.
The bulb socket should audibly click
into place.
왘 Reinstall the trim.
License plate lamp
1 Screws
왘 Loosen both screws 1.
왘 Remove the license plate lamp.
왘 Replace the bulb.
왘 Reinstall the license plate lamp.
왘 Retighten screws 1.
To Next Page
Loading...
Need help?
General
