319
Operation
Maintenance
1 Reset button
왘 Press reset button 1 on the instru-
ment cluster.
The maintenance service indicator
message is cleared and the standard
display appears in the multifunction
display (
컄 page 140).
Maintenance service term exceeded
If you have exceeded the suggested main-
tenance service term, you will see the fol-
lowing message in the right multifunction
display:
Service A exceeded by XXXX miles (km)
Service A exceeded by XXX days
In addition, a signal sounds when the mes-
sage appears.
Any authorized Mercedes-Benz Center will
reset the maintenance service indicator
following a completed maintenance ser-
vice.
Calling up the maintenance service
indicator display
왘 Switch on the ignition (컄 page 36).
The standard display of the control sys-
tem appears (
컄 page 135).
왘 Press button è or ÿ on the mul-
tifunction steering wheel repeatedly
until the standard display appears in
the multifunction display (
컄 page 140).
왘 Press button k or j on the
multifunction steering wheel until the
maintenance service indicator mes-
sage with the maintenance service
symbol 9 or
½ appears in the
left multifunction display and the main-
tenance service deadline appears in
the right multifunction display.
컄컄
To Next Page
Loading...
Need help?
General
