143
Controls in detail
Control system
NAV menu
The
NAV
menu contains the functions need-
ed to operate your navigation system.
왘 Press button è or ÿ repeatedly
until you see the message
NAV
in the
left multifunction display.
The message shown in the multifunction
display depends on the status of the navi-
gation system:
앫 With COMAND switched off, the mes-
sage
NAV off
appears in the
multifunction display.
앫 With COMAND switched on but route
guidance not activated, the direction of
travel and, if applicable, the name of
the street currently traveled on appear
in the multifunction display.
앫 With COMAND switched on and route
guidance activated, the direction of
travel and maneuver instructions ap-
pear in the multifunction display.
Please refer to the COMAND manual for in-
structions on how to activate the route
guidance system.
Distronic* menu
Use the Distronic menu to display the cur-
rent settings for your Distronic system.
What information is given in the left multi-
function display depends on whether the
Distronic system is active or inactive.
Please refer to the “Driving systems” sec-
tion of this manual (
컄 page 207) for in-
structions on how to activate Distronic.
왘 Press button è or ÿ repeatedly
until you see one of the following two
displays in the multifunction display.
Distronic deactivated
When Distronic is deactivated you will see
the standard display in the left multifunc-
tion display.
1 Vehicle ahead, if detected
2 Actual distance to vehicle ahead
3 Preset distance threshold to vehicle
ahead
4 Your vehicle
5 Symbol for activated distance warning
function
To Next Page
Loading...
Need help?
General
