Head Restraints, Rear
Folding head restraints backward
(with engine running):
Press symbol-side of rocker switch
to release the head restraints. The
head restraints will then fold back
ward for increased rear visibility.
Placing head restraints upright:
Pull head restraint forward by its
strap until it locks in position.
Inclination of head restraints:
The head restraint inclination can
be adjusted manually.
Notes:
For safety reasons, always drive
with the rear head restraints in the
upright position when the rear
seats are occupied.
To prevent damage to the rear
window sunshade, position the
head restraints upright only with
the sunshade fully retracted.
Upright head restraints can only
be folded backward with the
sunshade fully retracted.
Adjusting Telescopic Steering
Column
Turn key in steering lock to posi
tion 1 or 2 (with the driver’s or
front passenger’s door open, the
telescopic steering column can be
operated with the key removed or
in steering lock position 0).
To lengthen or shorten the steer
ing column, actuate the switch (1).
Note:
If the vehicle is equipped with
front power seats with memory,
the steering wheel position is
stored in memory with the seat
and head restraint position.
36
To Next Page
Loading...
Need help?
General
