Before replacing a blown fuse,
determine the cause of the short
circuit.
Spare fuses are furnished inside
the fuse box. Observe amperage
and color of fuse.
Always use a new fuse for re
placement. Never attempt to re
pair or bridge a blown fuse.
After replacing the fuse, engage
the fuse box cover at the rear and
secure with clamp (1).
Fuses
The fuse box is located in the
engine compartment.
All equipment protected by fuses
is listed by number and letter on a
label in the lid of the fuse box. The
numbers and letters above the
fuses correspond to the ones on
the label.
To gain access to the fuses, re
lease clamp (1), lift the fuse box
cover up and remove.
Towing the Vehicle
The rear towing eye is located at
the right, below the bumper. The
front towing eye is located on the
passenger side behind a flap in
the bumper panel.
Flap removal: Insert finger in the
flap opening and pull out.
To install the flap, engage the flap
at the top and press in the bottom
securely.
We recommend that the vehicle
be transported using flat bed
equipment. This method is pre
ferable to other types of towing.
95
Practical Hints
To Next Page
Loading...
Need help?
General
