High Mounted Stop Lamp
(21 W/32 cp bulb)
To replace the bulb, pull tabs on
both sides (arrows) - using a
screwdriver - to release cover.
Press bulb down, turn counter
clockwise and remove.
License Plate Lamps
(5 W bulb)
Loosen both the securing screws
(1), remove lamp and take out
bulb.
Spark Plugs
Remove and install spark plugs
only with combination wrench from
the vehicle tool kit or with a
recommended spark plug wrench.
Tightening torque:
300 E 4MATIC:
8 - 15 ft.lb. (1 0 -2 0 Nm).
300 E 2.8, 300 E, 300 CE, 400 E,
500 E:
1 5 -2 4 ft.lb. (20 - 30 Nm).
For approved spark plugs see
’’Technical Data” .
93
Practical Hints
To Next Page
Loading...
Need help?
General
