6 Control for
P82-0073-B13
Combination Switch
1 Low beam (with exterior lamp
switch turned to position f D )
2 High beam (with exterior lamp
switch turned to position | D )
3 High beam flasher (high beam
available independent of ex
terior lamp switch position)
4 Turn signals, right
5 Turn signals, left
To operate the turn signals, move
the combination switch past the
point of resistance (up or down).
The switch is automatically can
celed when the steering wheel is
turned to a large enough degree.
To signal minor directional
changes, such as changing lanes
on a highway, move combination
switch to the point of resistance
only and hold it there.
• windshield washer system
• headlamp cleaning system
(will work only with exterior
lamp switch in position ^00;
or |D ■
Canada only:
Also in position O when the
engine is running)
When the washer system is
activated, the wipers also
operate for a limited time.
The reservoir, hoses, and
nozzles of the windshield
washer and headlamp cleaning
systems are automatically
heated.
Windshield wiper control
0 Wiper off
1 Intermittent wiping
II Normal wiper speed
III Fast wiper speed
To Next Page
Loading...
Need help?
General
