*
NOTE Damage to the covers
The covers may be damaged and scratched
when being opened.
#
Use the disassembly tool provided in
the vehicle tool bag.
#
Do not use metallic or hard objects.
#
Remove the roof rack before installing
the covers.
Bear in mind the following related topic:
R
Vehicle tool kit overview (/ page 406)
An incorrectly attached roof rack or an incorrect
roof load can become detached from the vehicle.
Be sure to comply with the roof rack manufac‐
turer's installation instructions.
#
Carefully remove covers 1 in the direction
of the arrow with the disassembly tool.
#
Attach the roof rack at securing points 2.
#
Comply with the roof rack manufacturer's
installation instructions.
#
Secure the load on the roof rack.
Cup holder
Installing the cup holder in or removing it
from the center console
&
WARNING ‑ Risk of accident or injury
when using the cup holder while the
vehicle is moving
The cup holder cannot secure containers
while the vehicle is moving.
If you use a cup holder while the vehicle is
moving, the container may be flung around
and liquids may be spilled. The vehicle occu‐
pants may come into contact with the liquid
and if it is hot, they could be scalded. You
could be distracted from traffic conditions
and you may lose control of the vehicle.
#
Only use the cup holder when the vehi‐
cle is stationary.
#
Only use the cup holder for containers
of the right size.
#
Close the container, particularly if the
liquid is hot.
104
Seats and stowing
To Next Page
Loading...
Need help?
General
