Vehicles with an emergency spare wheel:
Removing the half shell
#
Remove half shell 3.
#
Remove wheel nuts 2.
#
Remove the emergency spare wheel.
#
Remove the rear half shell.
#
Use nuts 2 to secure the faulty wheel to the
spare wheel bracket. Specified tightening
torque: 14.75 lb-ft (20 Nm)
#
Stow the half shells in the cargo compart‐
ment.
Vehicles with an emergency spare wheel:
Observe the notes on the emergency spare
wheel.
Battery (vehicle)
Notes on the 12 V battery
&
WARNING Risk of an accident due to
work carried out incorrectly on the bat‐
tery
Work carried out incorrectly on the battery
can, for example, lead to a short circuit. This
can lead to function restrictions in safety-rel‐
evant systems, for example the lighting sys‐
tem, ABS (anti-lock braking system) or ESP
®
(Electronic Stability Program). The operating
safety of your vehicle may be restricted.
You could lose control of the vehicle in the
following situations:
R
when braking
R
in the event of abrupt steering maneuvers
and/or when the vehicle's speed is not
adapted to the road conditions
#
In the event of a short circuit or a simi‐
lar incident, contact a qualified special‐
ist workshop immediately.
#
Do not continue driving.
#
Always have work on the battery carried
out at a qualified specialist workshop.
R
Further information on ABS (/ page 165)
R
Further information on ESP
®
(/ page 166)
For safety reasons, Mercedes-Benz recommends
that you only use batteries which have been tes‐
ted and approved for your vehicle by Mercedes-
Benz. These batteries provide increased impact
protection to prevent vehicle occupants from
suffering acid burns should the battery be dam‐
aged in the event of an accident.
&
WARNING Risk of explosion due to elec‐
trostatic charge
Electrostatic charge can cause sparks which
may ignite the highly flammable gas mixture
in the battery.
372
Breakdown assistance
To Next Page
Loading...
Need help?
General
