#
Place the mobile phone as close to the cen‐
ter of mat 1 as possible with the display
facing upwards and secure it with rubber
strap 2.
When the charging symbol is shown in the
multimedia system, the mobile phone is
being charged.
Malfunctions detected during the charging
process are shown in the multimedia system
display.
%
The mat can be removed for cleaning, e.g.
using clean, lukewarm water, by unclipping
it.
Installing/removing the floor mats
&
WARNING Risk of accident due to
objects in the driver's footwell
Objects in the driver's footwell may impede
pedal travel or block a depressed pedal.
This jeopardizes the operating and road
safety of the vehicle.
#
Stow all objects in the vehicle securely
so that they cannot get into the driver's
footwell.
#
Always install the floor mats securely
and as prescribed in order to ensure
that there is always sufficient room for
the pedals.
#
Do not use loose floor mats and do not
place floor mats on top of one another.
#
To install: move the corresponding seat
backwards and lay the floor mat in the foot‐
well.
#
Press press-studs 1 onto holders 2.
#
Adjust the corresponding seat.
#
To remove: pull the floor mat off holders 2.
#
Remove the floor mat.
Seats and stowing
111
To Next Page
Loading...
Need help?
General
