Mercury 30 EFI FourStroke User Manual

MAINTENANCE
eng 99
Top Cowl Removal and Installation
REMOVAL
1. Unlock the rear latch by pulling lever up.
10190
2. Lift rear of cowl and disengage front hook.
10191
INSTALLATION
1. Lower the top cowl over the engine. Bring the front of the
cowl down first and engage the front hook, then lower the
cowl into its seated position with the bottom cowl.
2. Apply some downward pressure on the bottom cowl and
then lock the cowl in place by pushing in the cowl latch.
Ensure the top cowl is securely fastened by pulling up on
the back of the cowl.
Exterior Care
Your outboard is protected with a durable baked enamel finish.
Clean and wax often using marine cleaners and waxes.

Mercury 30 EFI FourStroke Specifications

General

Brand	Mercury
Model	30 EFI FourStroke
Category	Outboard Motor
Language	English