Attaches to the water intakes;
provides a fresh water
connection when flushing the
cooling system or operating
the engine.
Protecting External Outboard Components
• Lubricate all outboard components listed in Maintenance ‑
Inspection and Maintenance Schedule.
• Touch up any paint nicks. See your dealer for touch‑up
paint.
• Spray Quicksilver or Mercury Precision Lubricants Corrosion
Guard on external metal surfaces (except corrosion control
anodes).
Tube
Ref No.
Description Where Used Part No.
120
Corrosion
Guard
External metal surfaces 92-802878 55
Protecting Internal Engine Components
• Remove the spark plugs and inject a small amount of engine
oil inside of each cylinder.
• Rotate the flywheel manually several times to distribute the
oil in the cylinders. Reinstall spark plugs.
• Change the engine oil.
Gearcase
• Drain and refill the gearcase lubricant (refer to Gearcase
Lubrication).
Positioning Outboard for Storage
Store outboard in an upright (vertical) position to allow water to
drain out of the outboard.
To Next Page
Loading...
Need help?
General
