Mercury MercMonitor User Manual

PROPULSION MENU
94 eng
1. To engage the "Smart Tow" function, press the "–" and "+"
button at the same time. The Smart Tow "ON" icon will be
highlighted in the upper left corner and the information
above the "SET RPM" window will be changed to "+/– TO
DISENGAGE." When Smart Tow is engaged, the "ON" icon
will remain on and be visible on all of the monitor screens.
a - "ON" icon
b - "+/– TO
DISENGAGE"
2. Shift the drive unit into forward gear. The throttle must be
above the set cruise RPM or speed for the Smart Tow cruise
to function. When the throttle is moved below the set cruise
engine RPM or speed, the engine RPM will decrease with
the throttle movement.
3. Press the "–" button to decrease the engine RPM. Press the
"+" button to increase the engine RPM.
4. To disengage the "Smart Tow" function, press the "–" and
"+" button at the same time. The Smart Tow "OFF" icon will
be highlighted in the upper right corner, and the information
above the "SET RPM" window will change to "+/– TO
ENGAGE."
MODE
36531
SmartTow
[DOWN]
[MODE]
[ UP ]
OFF
a
ST
ONON
[MODE]
[ UP ]
+ / - TO DISENGAGE
SET
RPM
ACT
RPM
1000
1850
OFF
PROFILE : Cruise
b

Mercury MercMonitor Specifications

General

Brand	Mercury
Model	MercMonitor
Category	Marine Equipment
Language	English