Insert new module for the Autolab 8-Series
4 | Page
2 – Overview table loose modules
Module label
SMB-Coax cable
SMB-Coax cable copper
SMB-Coax –Banana cable
Alligator clip
Warning on PGSTAT100N
1
3
1
1
1
1
GPES 4.9.7 or higher
Nova 1.2 or higher
YES, with adjusted DIFFAMP
Module label
SMB-Coax cable
CD with calibration file
2
3
1
FRA 2.4 or higher
Nova 1.2 of higher
YES
Module label
SMB-Coax cable
1
3
Nova 1.8 or higher
YES
Module label
Cover for front connector
Lemo to banana cable
Analog bus connector
Warning on PGSTAT100N
1
1
2
1
1
Nova 1.4 or higher
Module label
Oscillator box
DB9 Oscillator connection cable
Crystal 6 MHz Au/TiO
2
polished
EQCM cell
Au counter electrode
Reference electrode
Ag/AgCl, 3M KCl
Driving force adjustment tool
Spare O-ring Reference electrode
Spare O-ring Counter electrode
Spare O-ring Viton Crystal
Spare O-ring Cell cover
2.5 mm hex driver
Spare EQCM cell screw
Warning on PGSTAT100N
1
1
1
2
1
1
1
1
1
1
4
1
1
3
1
Nova 1.4 or higher
YES
Module label
SMB-Coax cable
1
1
GPES 4.5 or higher
Nova 1.3 or higher
YES
Module label
Digital MUX cable
Warning on PGSTAT100N
1
1
1
GPES 4.7 or higher
FRA 4.7 or higher
Nova 1.5 or higher
Module label
SCAN250-ADC trigger cable old
SCAN250-ADC trigger cable new
1
1
1
GPES 4.9.7 or higher
Nova 1.2 or higher
YES
Module label
ADC10M-SCAN trigger cable old
ADC10M-SCAN trigger cable new
Ferrite bead
1
1
1
1
Nova 1.2 or higher
YES
Module label
Analog bus connector
Special ECN cable
Warning on PGSTAT100N
1
1
1
1
GPES 4.8 or higher
FRA 4.9.5 or higher
Nova 1.5 or higher
Module label 1
GPES 4.5 or higher
Nova 1.5 or higher
YES
Table 1 – Module compatibility table
Table 1 provides the overview for loose modules available for 8-Series Autolab
instruments, the part list for each module and the software and hardware requirements
or restrictions.
To Next Page
Loading...
Need help?
General
