8
CHAPTER 2
Use the AC cable wiring diagram below (Figure 2.7) to
create international or special-purpose power connectors:
Figure 2.7. AC cable color code
If the colors referred to in the diagrams don’t correspond to
the terminals in your plug, use the following guidelines:
■ Connect the blue wire to the terminal marked with an N
or colored black.
■ Connect the brown wire to the terminal marked with an
L or colored red.
■ Connect the green and yellow wire to the terminal
marked with an E or colored green or green and yellow.
ELECTRICAL SAFETY ISSUES
Pay close attention to these important electrical and safety
issues.
CAUTION: The MICA loudspeaker requires a
ground connection. Always use a grounded
outlet and plug.
TIP: Use the ring located on the rear of
MICA’s cabinet (to the right of the amplifier)
to provide strain relief for power and signal cables.
Do not use this ring for any other purpose.
To Next Page
Loading...
