Midea MDF24P1B Series Installation Instructions

NOTE: Do not push against the front of the panel or on the console –
they will dent.
Reposition dishwasher by
grasping both sides with hands.
Do not push against front door
panel with knee. Damage to the
door panel will occur.
4. Push dishwasher completely into the opening so that the front corners
of the dishwasher door are flush with the cabinet doors
NOTE: It is all right if the dishwasher fits tightly in o cabinet opening. Do
not remove insulation blanket – the blanket reduces the sound level.
LEVEL DISHWASHER
IMPORTANT: Dishwasher must be level for proper dish rack operation and
wash performance.
1. Level the dishwasher so that its front panel is aligned with the adjacent
cabinet doors.
NOTE: With some installations, it may be easier to adjust the front leg
using a fl t blade screwdriver.
•
To Lower - Turn the leveling leg counterclockwise.
•
To Raise - Turn the leveling leg clockwise.
a
To Raise
To Lower
a Raise one side of
the dish
w
asher
2. Check tha
t the leveling legs are firmly again t the floo .
3. Close and latch the door, and place level against the front panel. Check
that dishwasher is plumb. If needed, adjust leveling leg or add shims
until dishwasher is plumb.
NOTE: Shims must be securely attached to floor o prevent their
movement when the dishwasher is operated.
4. Repeat for other side of dishwasher.
Safety
Precautions
Installation
Requirements
Installation
Instructions
21

Midea MDF24P1B Series Specifications

General

Brand	Midea
Model	MDF24P1B Series
Category	Dishwasher
Language	English