EasyManuals Logo
Home>Midea>Dishwasher>MDF24P1B Series

Midea MDF24P1B Series Installation Instructions

Midea MDF24P1B Series
109 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #33 background imageLoading...
Page #33 background image
PRE-TEST CHECKLIST
Safety
Precautions
Installation
Requirements
Installation
Instructions
32
a
b
c
b
1
/
2
(1.3 cm)
a
a
Countertop
b
Dishwasher
Door
Remove Plastic tub cap
# 8 X 1-1/4 IN screw
Reinsert Plastic tub cap
1. Check that the power is OFF.
2. Check door opening and closing. If door does not open and close freely
or tends to fall, check spring adjustments. See “Check Door Balance.”
3. Check that wiring is secure under the dishwasher, not pinched or in
contact with door springs or other components. See “Position the
Water Line and House Wiring.”
4. Check door alignment with tub. If door hits tub, level dishwasher. See
“Level Dishwasher.”
5. Pull out the lower rack, about halfway. Check that the rack does not roll
back into the dishwasher or forward onto the door. If the rack moves,
adjust leveling legs. See “Level the Dishwasher.”
CAUTION
Do not O v ertig h ten Side Screw s
Close dishwasher door and verify that gap between the countertop
and the top of the dishwasher door is at least
1/4
" (0.64 cm).
5.
4.
Remove towel from dishwasher.
6. Reinstall the lower dish rack.

Table of Contents

Other manuals for Midea MDF24P1B Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Midea MDF24P1B Series and is the answer not in the manual?

Midea MDF24P1B Series Specifications

General IconGeneral
BrandMidea
ModelMDF24P1B Series
CategoryDishwasher
LanguageEnglish

Related product manuals