Detergent
for pre-wash/
main wash
Program
Description of the cycle
Duration
(min)
Current
(kWh)
Water
(L)
Medium
for
rinse
Washing (60℃)
Rinse
18 (g) 90 1.234 10.2
90 min
Rinsing (65℃)
Drying
Washing (50℃)
Rinse
12 (g) 30 0.611 10.0
Quickly
Rinsing (45℃)
Pre-wash 10 (g) 15 0.020 3.6
Soaking
REMARK:
EN60436:This program is for testing. This is information for testing
compatibility in accordance with the EN60436 standard
Energy saving
1.Manual pre-rinsing of dishes leads to increased consumption of water and energy and is
not recommended.
2.When a domestic dishwasher is used in accordance with the instructions for use, washing dishes
in it usually consumes less energy and water during the use phase than manual washing.
Start of the program
1.Pull out the lower and upper baskets, place the dishes and push them back. We recommend
that you fill the lower basket first, then the upper one.
2.Add detergent.
3.Connect the plug to the socket. Power supply information is provided in the "Product Data Sheet"
section. Make sure that the water supply is opened to the maximum, to full pressure.
4.Open the door and press the on/off button.
5.Select the program and the corresponding indicator will light up. Then close the door and the washing
machine will start the cycle.
14
To Next Page
Loading...
Need help?
General
