Switching on and off
24
Switching the coffee machine
on
Touch the On/Off sensor.
The appliance heats up and rinses the
pipework. Hot water will run out of the
central spout.
When Select drink appears in the display,
you can make drinks.
If the coffee machine is already at
operating temperature, rinsing will not
take place.
If you do not touch any sensors or run
any maintenance programmes, the
display will switch itself off after approx.
7minutes to save energy.
The right-hand LED will flash on and off
as long as the machine is switched on.
Touch any one of the sensors to wake
the machine up again to make a
drink.
Switching the coffee machine
off
Touch the On/Off sensor.
If the coffee machine has been used for
making a drink it will rinse itself before
switching off.
If you have made a drink using milk,
Place milk pipe in drip tray will appear in
the display.
Insert the end of the milk pipe into the
aperture in the drip tray, then touch
OK.
If the milk system is not rinsed out
before switching off, it will have to be
rinsed the next time the machine is
switched on.
Switching off for longer
periods of time
If the coffee machine is not going to be
used for a longer period of time, e.g. if
you are going on holiday:
Empty the drip tray, the waste
container and the water container.
Clean all parts thoroughly, including
the brew unit.
Switch the machine off and withdraw
the plug to disconnect it from the
power supply.
To Next Page
Loading...
Need help?
General
