A range of Miele branded cleaning and
conditioning agents are available to
order through your Miele Dealer /
Chartered Agent, the Miele Spare Parts
Department, or via the internet on
www.miele-shop.com.
,
Before any cleaning or
maintenance work is carried out,
disconnect the cooker hood from the
mains supply.
,
Halogen lamps get very hot
during use and remain hot for some
time after being switched off. The
hot lamps are also susceptible to
damage from damp cleaning. Wait a
few minutes after switching off
before commencing cleaning.
Housing
The surfaces and controls are
susceptible to scratches and
abrasions. Please observe the
following cleaning instructions.
^
All external surfaces and controls can
be cleaned using a Miele E-Cloth, or
with warm water and a small amount
of washing-up liquid applied with a
well wrung-out soft sponge or cloth.
^
Wipe the surfaces dry using a soft
cloth.
Do not use:
–
cleaning agents containing soda,
acids, chlorides or solvents,
–
abrasive cleaning agents, e.g.
powder cleaners or cream cleaners
and abrasive sponges, as well as pot
scourers or sponges which have
been used previously with abrasive
cleaning agents.
These will damage the surface
material.
Grease filters
The re-usable metal grease filters in the
appliance remove solid particles
(grease, dust, etc.) from the kitchen
vapours, preventing soiling of the
cooker hood.
To avoid a build-up of grease, the
grease filters should be cleaned
regularly (at least every 3-4 weeks), but
always clean immediately the grease
filter indicator lamp comes on.
,
An oversaturated filter is a fire
hazard.
Cleaning and care
20
To Next Page
Loading...
Need help?
General
Weight and Dimensions
