Interrupting a function
You can interrupt a function which is in
operation at any time.
Procedure:
^
Press Stop.
The colon in the display stops flashing.
The light bar between Stop and Start
comes on.
The heating is switched off and the
cooking time remaining is stored in me
-
mory.
You can now open the door, for exam-
ple, to stir something.
Take care. Hot steam will escape
when you open the door. Make sure
that the contents do not spill over
when taking containers out of the
steam oven. Danger of burning or
scalding!
To continue:
^
Close the door.
^
Press Start.
If you have only interrupted the function
briefly, you will see the cooking time re
-
maining continue to count down in the
display after the door has been closed.
If the function has been interrupted for
a longer period, the appliance will have
cooled down and will need to heat up
again. In this case, the display will
show the current oven temperature ri
-
sing until it reaches the set temperatu
-
re. Only when the set temperature has
been reached, does the display switch
to show the cooking time remaining.
Altering a function
If you wish to select a different function
whilst the oven is in operation, turn the
selector to the new function and then
enter time and temperature as previ
-
ously described.
Use
28
To Next Page
Loading...
Need help?
General
