Miele G 2 Series Manual

Technical Information
7
G 1xxx/G 2xxx
Function Programming Display
Model setting
1
Press the Program button
38x. To make the desired
setting, press and hold the
Program button until the
"Intake/Drain" LED lights
up. Then briefly press the
Program button.
The "Intake/Drain" LED flashes 3x
slowly and 8x rapidly. "SaniWash"
LED off: Models without drying fan;
"SaniWash" LED flashes: Models
with UTT version 1 or 2.
3
Country setting
1
Press the Program button
39x. To make the desired
setting, press and hold the
Program button until the
"Intake/Drain" LED lights
up. Then briefly press the
Program button.
The "Intake/Drain" LED flashes 3x
slowly and 9x rapidly. The
"SaniWash" LED’s flash pattern
indicates which country is set: 1x:
Europe; 2x: Australia; 3x: USA; 4x:
Japan; 5x: Italy/Spain; 6x: Southern
Europe.
4
Table 2: Service Programming Mode Summary, G 118x/G 2170/G 218x
1
If the electronic needs to be replaced during servicing, the following steps must be taken
during programming: In the first step, set the country specification and model, then switch
off the appliance. Repeat access and then set appliance width and height, and the
appropriate supply water hardness.
2
If the dishwasher is connected to an external ion exchanger water softener (i.e. that
needs to be regenerated with salt), the water hardness delivered by the system must be
set. If this value is unknown, set to 8°d (8.6 grains per gallon).
3
Circulation Turbothermic drying (UTT) version 1 (w/condenser), version 2 (w/out condenser).
4
The SER country specification includes the following countries: Portugal, France, the
Netherlands, Belgium and Great Britain.
Save and quit:
Switch off the appliance.
Water Hardness [°d] Water Hardness [gpg]
Flash Pattern of
"SaniWash" LED
1 – 4 1.1 – 4.3 1x rapidly
5 – 7 5.4 – 7.5 2x rapidly
8 – 11 8.6 – 11.8 3x rapidly
12 – 15 12.8 – 16.1 4x rapidly
1
16 – 20 17.1 – 21.4 5x rapidly
21 – 25 22.5 – 26.8 6x rapidly
26 – 30 27.8 – 32.1 7x rapidly
31 – 36 33.2 – 38.5 8x rapidly
37 – 50 39.6 – 53.5 9x rapidly
51 – 70 54.6 – 74.9 1x slowly
Table 3: Water Hardness Settings, G 118x/G 2170/G 218x
1
Standard setting.

Miele G 2 Series Specifications

General

Brand	Miele
Model	G 2 Series
Category	Dishwasher
Language	English