Settings
28
You can alter the dishwasher’s
controls to suit changing requirements
by adjusting the settings.
The settings can be altered at any
time.
Opening the Settings menu
Switch the dishwasher on with the
button if it is switched off.
Use the Program button to select the
More option.
The first of the additional programs will
appear in the display.
Select the Settings menu option
using the buttons and confirm
with OK.
The first option in the Settings menu will
appear in the display.
For further information about the
display functionality, see “Display
functions” under “Guide to the
appliance”.
Changing settings
Use the buttons to select the
menu option you want to change and
confirm your selection with OK.
Sub-menu options that have already
been selected will have a check
beside them.
Use the buttons to select the
setting you want and confirm with
OK.
To exit a sub-menu again, press the
Backbutton.
The display will revert to the menu level
above.
Closing the Settings menu
Press the Back button.
The display will change to the More
menu.
To Next Page
Loading...
Need help?
General
