Program options
58
Selecting program options
You can use program options to adjust
the programs.
To do this, you can select or deselect
the program options before running the
program.
Open the door.
Switch the dishwasher on with the
button.
The indicator light next to the selected
program will come on.
Select a different program as
required.
Press the button for the program
option you want.
The indicator light for the relevant
button will come on if the program
option is available for the program
selected.
If the program option is not compatible
with the selected program, a message
to this effect will appear in the display.
In this instance, confirm the message
with OK.
Start the program by closing the
door.
The selected program option will remain
active for that particular program until
the setting is changed.
Express
The Express option reduces the
program cycle time.
In order to achieve optimum cleaning
results, the temperature, and therefore
the energy consumption, will increase
with this option.
The time by which the program cycle
time is shortened varies according to
the selected program.
Selecting the Express option may
take precedence over other selected
options.
When used in combination with the
QuickIntenseWash program, the
Express option results in a rinse
designed solely for the purpose of
flushing out the wash cabinet to
remove salt solution that leaked out
after refilling the salt reservoir.
IntenseZone
The IntenseZone program option
increases cleaning performance in the
lower basket.
Energy consumption increases due to
the extended wash duration in the lower
basket and increased temperature.
To Next Page
Loading...
Need help?
General
