Problem solving guide
69
Many malfunctions and errors that can occur in daily operation can be easily
remedied. You can save time and money in many cases, as you do not need to
contact Miele Customer Service.
Information to help you rectify malfunctions yourself can be found at
www.miele.com/service.
The following tables are designed to help you to find the cause of a malfunction or
an error and to resolve it.
This section only lists faults that you can remedy yourself. All other faults are
shown in Fault FXX.
Technical problems
Problem Possible cause and solution
The dishwasher will not
start.
The door is not closed properly.
Raise the door upward until the catch engages.
The dishwasher is not plugged in.
Insert the plug.
The circuit breaker has tripped.
Reset the circuit breaker (see data plate for the
minimum fuse rating).
If the circuit breaker trips again, contact Miele
Service.
The dishwasher is not switched on.
Switch the dishwasher on with the button.
The dishwasher stops
during a program.
The circuit breaker has tripped.
Reset the circuit breaker (see data plate for the
minimum fuse rating).
If the circuit breaker trips again, contact Miele
Service.
To Next Page
Loading...
Need help?
General
