Operation
68
Turning on the dishwasher
Turn on the water supply if it is turned
off.
Open the door.
Make sure the spray arms can rotate
freely.
Touch the sensor button.
If the dishwasher has been turned off
for longer than 1minute, you will
need to hold the sensor button for
a bit longer (wipe protection).
The program selected will appear in the
display briefly and the indicator light for
the program selected will come on.
Then the display will show the esti-
mated duration for the selected pro-
gram.
Selecting a program
Choose your program according to the
type of load and the degree of soiling.
The different programs and their uses
are described under Program over-
view.
Touch the sensor button for the re-
quired program.
The sensor button for the selected pro-
gram will light up.
Additional programs can be selected
under More.
To do so, touch the More sensor
button.
The first of the additional programs will
appear in the display.
Use the sensor buttons in the
display to select the program you
want.
You can now select program options
(see “Options”).
If any program options are selected, the
appropriate sensor buttons will also
light up.
If you want to control the dishwasher
remotely using the Miele app (depend-
ing on model), you will first need to acti-
vate the Remote start option (see “Acti-
vate Remote start” under “Options”).
Close the door within 4seconds.
To Next Page
Loading...
Need help?
General
