Frequently asked questions
99
Water drainage fault
Problem Possible cause and solution
The in-operation indica-
tor light is flashing
quickly.
The alarm tone is
sounding.
The following message
appears on the display:
Drain
Before remedying the fault:
Turn off the dishwasher.
Water drainage fault.
There might be water in the wash cabinet.
Clean the filter combination (see “Cleaning the fil-
ters” under “Cleaning and care”).
Clean the drain pump (see “Cleaning the drain
pump” under “Cleaning and care”).
Remove any kink or loop in the drain hose.
To Next Page
Loading...
Need help?
General
