Frequently asked questions
97
Door release
Problem Possible cause and solution
The in-operation indica-
tor light is flashing
quickly.
The alarm tone is
sounding.
The following fault is in-
dicated via the display:
Before remedying the fault:
Turn off the dishwasher.
Door fault The door does not open automatically.
There may be a technical fault.
Open the door manually (see “Opening the door”
under “Before using for the first time”) and turn the
dishwasher back on again.
If the same fault message appears again, contact
Miele Customer Service.
The door does not close automatically.
The door might be obstructed by an item inside the
appliance.
If this is the case, remove the item causing an ob-
struction and turn the dishwasher on again.
If the same fault message appears again, contact
Miele Customer Service.
To Next Page
Loading...
Need help?
General
